Installation precautions of Vapor recovery hose Wholesale Price
During the actual installation process of the Vapor recovery hose Wholesale Price, considering the calculation results with a ruler, measuring the length of the hose before installation may affect production efficiency. Some manufacturers install the ruler directly on the Vapor recovery hose Wholesale Price and cut off the ruler after installation.
1. When choosing a Vapor recovery hose Wholesale Price, for the convenience of installation, please choose a metal hose with a loose flange at one end as much as possible. 2. The surface of the metal hose should be protected during electric welding operations on the construction site to prevent welding slag and arc ignition from burning the metal hose.
3. It is strictly forbidden to twist and install a Vapor recovery hose Wholesale Price, there should be no bending along the root of the metal hose, and there should be no dead bends.
5. The passing medium must not be corrosive to the bellows material, and the chloride ion content in the medium should be ≤ 25PPM. Install in strict accordance with the installation method of the Vapor recovery hose Wholesale Price. It is strictly forbidden to mechanically damage the flange sealing surface.
Through the above analysis of the technical introduction of the installation precautions of Vapor recovery hose Wholesale Price, hope it helps you.